Nylon 6/6 Set Screw, Slotted Drive, Flat Point, #4-40, 1-1/4" Length (Pack of 100)

Nylon 6/6 Set Screw, Slotted Drive, Flat Point, #4-40, 1-1/4" Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Set Screw, Slotted Drive, Flat Point, #4-40, 1-1/4" Length (Pack of 100) Feature

• Set Screws keep parts from turning relative to a shaft
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Do not have an external head
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers. Flat Points are useful for minimizing marring and are good for making frequent adjustments.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon 6/6 Set Screw, Slotted Drive, #8-32, 3/4" Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.256" ID, 0.290" OD, 0.031" Thick, 0.348" Shoulder Diameter, 0.093" Length (Pack of 100)
• Nylon 6/6 Set Screw, Recessed Slotted Drive, #6-32, 1/4" Length (Pack of 100)
• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 7/8" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, 1/4"-20, 3" Length (Pack of 25)

Detail Reviews

Zinc Plated Alloy Steel Set Screw, Hex Socket Drive, Cup Point, 3/8"-16, 1/2" Length (Pack of 25)

Zinc Plated Alloy Steel Set Screw, Hex Socket Drive, Cup Point, 3/8"-16, 1/2" Length (Pack of 25) Reviews

Other Picture

Zinc Plated Alloy Steel Set Screw, Hex Socket Drive, Cup Point, 3/8"-16, 1/2" Length (Pack of 25) Feature

• Set Screws keep parts from turning relative to a shaft
• Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
• Do not have an external head
• Drive system is a hexagon-shaped hole
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials. Zinc Plating helps to prevent corrosion.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Cup Point is the most common point type, with good holding capability.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Black Oxide Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #4-40, 1/8" Length (Pack of 100)
• Alloy Steel Set Screw, Hex Socket Drive, Cup Point, 1/2"-13, 3/4" Length (Pack of 25)
• Black Oxide Alloy Steel Set Screw, Hex Socket Drive, #5-40, 5/16" Length (Pack of 50)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #1-72, 5/16" Length (Pack of 100)
• Alloy Steel Socket Cap Screw, Button Head, Hex Socket Drive, 5/16"-18, 5/8" Length (Pack of 100)

Detail Reviews

Stainless Steel 18-8 Set Screw, Vented Hex Socket Drive, Cup Point, M2.5-0.45, 5mm Length (Pack of 10)

Stainless Steel 18-8 Set Screw, Vented Hex Socket Drive, Cup Point, M2.5-0.45, 5mm Length (Pack of 10) Reviews

Other Picture

Stainless Steel 18-8 Set Screw, Vented Hex Socket Drive, Cup Point, M2.5-0.45, 5mm Length (Pack of 10) Feature

• Set Screws keep parts from turning relative to a shaft
• General Purpose Stainless Steel suitable where formability and cost are important considerations
• Do not have an external head
• Drive system is a hexagon-shaped hole
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316). Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to % of Nickel contained in the material.

Stainless Steel 18-8 denotes 18% chromium and 8% nickel. Stainless Steel 18-8 can be formed and welded. Stainless Steel 18-8 is typically non-magnetic, though the material can become slightly magnetic when cold worked (cold working refers to altering the physical properties of the material without the use of temperature).

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Vented fasteners have been drilled through their entire length to eliminate the possibility of virtual leaks caused by the trapped volume of air at the bottom of blind tapped holes. Cup Point is the most common point type, with good holding capability.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

Detail Reviews

4-40 X 1/8 Socket Set Screws / Coarse / Cup Pt / Alloy Steel / Black Oxide / 100 Pc. Carton

4-40 X 1/8 Socket Set Screws / Coarse / Cup Pt / Alloy Steel / Black Oxide / 100 Pc. Carton Reviews

Other Picture

4-40 X 1/8 Socket Set Screws / Coarse / Cup Pt / Alloy Steel / Black Oxide / 100 Pc. Carton Feature

• Socket Set Screws
• Alloy Steel with Black Oxide
• Coarse
• Cup Pt

4-40 X 1/8 Socket Set Screws / Coarse / Cup Pt / Alloy Steel / Black Oxide

Visit Store Now !!

Detail Products

Detail Reviews

10-24 X 1/4 Socket Set Screws / Coarse / Cone Pt / Alloy Steel / Black Oxide / 100 Pc. Carton

10-24 X 1/4 Socket Set Screws / Coarse / Cone Pt / Alloy Steel / Black Oxide / 100 Pc. Carton Reviews

Other Picture

10-24 X 1/4 Socket Set Screws / Coarse / Cone Pt / Alloy Steel / Black Oxide / 100 Pc. Carton Feature

• Socket Set Screws
• Alloy Steel with Black Oxide
• Coarse
• Cone Pt

10-24 X 1/4 Socket Set Screws / Coarse / Cone Pt / Alloy Steel / Black Oxide

Visit Store Now !!

Detail Products

Detail Reviews

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, Nylon Patch, 5/8"-11, 1-1/2" Length (Pack of 25)

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, Nylon Patch, 5/8"-11, 1-1/2" Length (Pack of 25) Reviews

Other Picture

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, Nylon Patch, 5/8"-11, 1-1/2" Length (Pack of 25) Feature

• Set Screws keep parts from turning relative to a shaft
• Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
• Do not have an external head
• Drive system is a hexagon-shaped hole
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Cup Point is the most common point type, with good holding capability.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings. A spot of nylon applied to the threads increases gripping power and keeps them in place.

Visit Store Now !!

Detail Products

• Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #6-32, 5/8" Length (Pack of 10)
• Black Oxide Alloy Steel Set Screw, Hex Socket Drive, Cup Point, 5/16"-18, 7/16" Length (Pack of 100)
• Black Oxide Alloy Steel Set Screw, Hex Socket Drive, #10-24, 1/4" Length (Pack of 50)
• Black Oxide Heat Treated Alloy Steel Socket Head Cap Screw, Hex Socket Drive, 1/4"-28, 7/8" Length (Pack of 100)
• Zinc Plated Steel Sheet Metal Screw, Pan Head, Phillips Drive, #6-20, 1/2" Length (Pack of 100)

Detail Reviews

Nylon 6/6 Set Screw, Slotted Drive, #10-24, 1/2" Length (Pack of 100)

Nylon 6/6 Set Screw, Slotted Drive, #10-24, 1/2" Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Set Screw, Slotted Drive, #10-24, 1/2" Length (Pack of 100) Feature

• Set Screws keep parts from turning relative to a shaft
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Do not have an external head
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Black Oxide Alloy Steel Set Screw, Hex Socket Drive, Cup Point, 5/16"-18, 7/16" Length (Pack of 100)
• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 7/8" Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.230" ID, 0.299" OD, 0.078" Thick, 0.395" Shoulder Diameter, 0.187" Length (Pack of 100)
• Nylon Set Screw, Recessed Slotted Drive, #8-32, 1/4" Length (Pack of 25)
• Nylon Socket Cap Screw, Hex Socket Drive, 1/2"-13, 1/2" Length (Pack of 25)

Detail Reviews

10-32 x .400, End force - 3.00 lbs., Inch, Stain. Steel Body/Nose, Knurled Handle, Locking Element, Non-Locking, Hand Retractable Spring Plunger (1 Each)

10-32 x .400, End force - 3.00 lbs., Inch, Stain. Steel Body/Nose, Knurled Handle, Locking Element, Non-Locking, Hand Retractable Spring Plunger (1 Each) Reviews

Other Picture

Hand Retractable Spring Plungers - Inch and Metric Steel and Stainless Steel - Knurled Handle - Non Locking Steel and Stainless Steel CAD drawing for this part is available on our website.

Visit Store Now !!

Detail Products

Detail Reviews

Alloy Steel Set Screw, Hex Socket Drive, Knurled Cup Point, M4-0.7, 20mm Length (Pack of 5)

Alloy Steel Set Screw, Hex Socket Drive, Knurled Cup Point, M4-0.7, 20mm Length (Pack of 5) Reviews

Other Picture

Alloy Steel Set Screw, Hex Socket Drive, Knurled Cup Point, M4-0.7, 20mm Length (Pack of 5) Feature

• Set Screws keep parts from turning relative to a shaft
• Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
• Do not have an external head
• Drive system is a hexagon-shaped hole
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Also known as oval cup, the round tip of the Knurled Cup Point minimizes deformation of the contact surface, and is ideal for applications requiring frequent adjustments.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Alloy Steel Set Screw, Hex Socket Drive, Cone Point, M10-1.5, 10mm Length (Pack of 50)
• Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #6-32, 5/8" Length (Pack of 10)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M4-0.7, 12mm Length (Pack of 100)
• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• Black Oxide Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #4-40, 1/2" Length (Pack of 100)

Detail Reviews

Nylon 6/6 Set Screw, Slotted Drive, #10-32, 1-1/4" Length (Pack of 100)

Nylon 6/6 Set Screw, Slotted Drive, #10-32, 1-1/4" Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Set Screw, Slotted Drive, #10-32, 1-1/4" Length (Pack of 100) Feature

• Set Screws keep parts from turning relative to a shaft
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Do not have an external head
• Driven by a flat-bladed driver
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #6-32, 1-1/2" Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.195" ID, 0.234" OD, 0.039" Thick, 0.500" Shoulder Diameter, 0.124" Length (Pack of 100)
• Nylon 6/6 Socket Cap Screw, Hex Socket Drive, #6-32, 1" Length (Pack of 100)
• Nylon Set Screw, Recessed Slotted Drive, #8-32, 1/4" Length (Pack of 25)
• Nylon 6/6 Machine Screw, Round Head, Slotted Drive, #4-40, 3/32" Length (Pack of 100)

Detail Reviews

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, Nylon Patch, #10-32, 1/4" Length (Pack of 50)

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, Nylon Patch, #10-32, 1/4" Length (Pack of 50) Reviews

Other Picture

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, Nylon Patch, #10-32, 1/4" Length (Pack of 50) Feature

• Set Screws keep parts from turning relative to a shaft
• Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
• Do not have an external head
• Drive system is a hexagon-shaped hole
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Cup Point is the most common point type, with good holding capability.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths. A spot of nylon applied to the threads increases gripping power and keeps them in place.

Visit Store Now !!

Detail Products

• Black Oxide Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #8-36, 5/16" Length (Pack of 100)
• Black Oxide Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #6-32, 1/4" Length (Pack of 100)
• Black Oxide Alloy Steel Set Screw, Hex Socket Drive, #10-24, 1/4" Length (Pack of 50)
• Zinc Plated Steel Sheet Metal Screw, Pan Head, Phillips Drive, #6-20, 1/2" Length (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M4-0.7, 12mm Length (Pack of 100)

Detail Reviews