Alloy Steel Set Screw, Hex Socket Drive, Cup Point, 3/8"-16, 3/8" Length (Pack of 25)

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, 3/8"-16, 3/8" Length (Pack of 25) Reviews

Other Picture

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, 3/8"-16, 3/8" Length (Pack of 25) Feature

• Set Screws keep parts from turning relative to a shaft
• Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
• Do not have an external head
• Drive system is a hexagon-shaped hole
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Cup Point is the most common point type, with good holding capability.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Alloy Steel Set Screw, Hex Socket Drive, Cup Point, 1/4"-28, 1/4" Length (Pack of 10)
• Alloy Steel Socket Cap Screw, Hex Socket Drive, #10-24, 1-3/4" Length (Pack of 100)
• Alloy Steel Socket Cap Screw, Flat Head, Hex Socket Drive, 5/16"-18, 1-1/2" Length (Pack of 25)
• Alloy Steel Set Screw, Hex Socket Drive, #6-32, 3/4" Length (Pack of 100)
• Black Oxide Alloy Steel Set Screw, Hex Socket Drive, Flat Point, 1/4"-20, 5/16" Length (Pack of 50)

Detail Reviews

4-.70X25 Metric Socket Set Screw (100 count)

4-.70X25 Metric Socket Set Screw (100 count) Reviews

Other Picture

4-.70X25 Metric Socket Set Screw

Visit Store Now !!

Detail Products

Detail Reviews

Black Oxide Alloy Steel Set Screw, Hex Socket Drive, 3/8"-16, 7/8" Length (Pack of 50)

Black Oxide Alloy Steel Set Screw, Hex Socket Drive, 3/8"-16, 7/8" Length (Pack of 50) Reviews

Other Picture

Black Oxide Alloy Steel Set Screw, Hex Socket Drive, 3/8"-16, 7/8" Length (Pack of 50) Feature

• Set Screws keep parts from turning relative to a shaft
• Black Oxide coating helps reduce friction and provides mild corrosion resistance
• Do not have an external head
• Drive system is a hexagon-shaped hole
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

The Black Oxide coating provides some lubricity to the product, meaning that there is less friction generated when using these products. The coating also provides a mild corrosion resistance, but should not be relied on in environments where corrosion resistance is a primary concern.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Alloy Steel Set Screw, Hex Socket Drive, #6-32, 3/4" Length (Pack of 100)
• Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #5-40, 5/16" Length (Pack of 100)
• Alloy Steel Socket Cap Screw, Hex Socket Drive, #10-24, 1-3/4" Length (Pack of 100)
• Alloy Steel Set Screw, Hex Socket Drive, Cup Point, Nylon Patch, #8-32, 1/2" Length (Pack of 10)
• Nylon 6/6 Shoulder Washer, 0.120" ID, 0.154" OD, 0.062" Thick, 0.291" Shoulder Diameter, 0.296" Length (Pack of 100)

Detail Reviews

Alloy Steel Set Screw, Hex Socket Drive, Dog Point, M10-1.5, 40mm Length (Pack of 50)

Alloy Steel Set Screw, Hex Socket Drive, Dog Point, M10-1.5, 40mm Length (Pack of 50) Reviews

Other Picture

Alloy Steel Set Screw, Hex Socket Drive, Dog Point, M10-1.5, 40mm Length (Pack of 50) Feature

• Set Screws keep parts from turning relative to a shaft
• Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
• Do not have an external head
• Drive system is a hexagon-shaped hole
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Also called extended or pilot point, the flat tip of the Dog Point is extended to fit into a preexisting hole to join two items together.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Alloy Steel Set Screw, Hex Socket Drive, Cone Point, M4-0.7, 20mm Length (Pack of 10)
• Alloy Steel Set Screw, Hex Socket Drive, Cup Point, M2-0.4, 12mm Length (Pack of 50)
• Alloy Steel Set Screw, Hex Socket Drive, Flat Point, M5-0.8, 6mm Length (Pack of 10)
• Alloy Steel Socket Cap Screw, Hex Socket Drive, M6-1, 45mm Length (Pack of 50)
• Alloy Steel Socket Cap Screw, Flat Head, Hex Socket Drive, M2.5-0.45, 5mm Length (Pack of 10)

Detail Reviews

Kipp PFP-10 Stainless-Ball Plastic-Body Push-Fit Plunger End force - 1.57 lbs., .158/4mm (A - Diameter)

Kipp PFP-10 Stainless-Ball Plastic-Body Push-Fit Plunger End force - 1.57 lbs., .158/4mm (A - Diameter) Reviews

Other Picture

Push Fit Plungers - Plastic or Stainless Steel Body w/ Stainless Steel or Plastic Ball - Small and lightweight for use in sensitive and light duty applications. Available with black thermoplastic or stainless steel bodies. The spring and ball are stainless steel or white plastic. CAD drawing for this part is available on our website.

Visit Store Now !!

Detail Products

Detail Reviews

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, M16-2, 50mm Length (Pack of 50)

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, M16-2, 50mm Length (Pack of 50) Reviews

Other Picture

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, M16-2, 50mm Length (Pack of 50) Feature

• Set Screws keep parts from turning relative to a shaft
• Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
• Do not have an external head
• Drive system is a hexagon-shaped hole
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Cup Point is the most common point type, with good holding capability.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Alloy Steel Set Screw, Hex Socket Drive, Cup Point, 3/8"-16, 2" Length (Pack of 10)
• Alloy Steel Set Screw, Hex Socket Drive, Flat Point, M5-0.8, 6mm Length (Pack of 10)
• Alloy Steel Socket Cap Screw, Hex Socket Drive, M6-1, 45mm Length (Pack of 50)
• Alloy Steel Set Screw, Hex Socket Drive, Knurled Cup Point, M5-0.8, 16mm Length (Pack of 10)
• Alloy Steel Set Screw, Hex Socket Drive, Cone Point, M4-0.7, 20mm Length (Pack of 10)

Detail Reviews

Alloy Steel Set Screw, Hex Socket Drive, Cone Point, M12-1.75, 40mm Length (Pack of 25)

Alloy Steel Set Screw, Hex Socket Drive, Cone Point, M12-1.75, 40mm Length (Pack of 25) Reviews

Other Picture

Alloy Steel Set Screw, Hex Socket Drive, Cone Point, M12-1.75, 40mm Length (Pack of 25) Feature

• Set Screws keep parts from turning relative to a shaft
• Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
• Do not have an external head
• Drive system is a hexagon-shaped hole
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Good for permanent setting of parts, the sharp point of the Cone penetrates deep into the surface to lock in place.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Alloy Steel Set Screw, Hex Socket Drive, Knurled Cup Point, M5-0.8, 16mm Length (Pack of 10)
• Alloy Steel Set Screw, Hex Socket Drive, Flat Point, M5-0.8, 6mm Length (Pack of 10)
• Alloy Steel Set Screw, Hex Socket Drive, Cup Point, M2-0.4, 12mm Length (Pack of 50)
• Alloy Steel Set Screw, Hex Socket Drive, Dog Point, M5-0.8, 12mm Length (Pack of 10)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M3-0.5, 25mm Length (Pack of 100)

Detail Reviews

Alloy Steel Set Screw, Hex Socket Drive, Cone Point, M10-1.5, 25mm Length (Pack of 5)

Alloy Steel Set Screw, Hex Socket Drive, Cone Point, M10-1.5, 25mm Length (Pack of 5) Reviews

Other Picture

Alloy Steel Set Screw, Hex Socket Drive, Cone Point, M10-1.5, 25mm Length (Pack of 5) Feature

• Set Screws keep parts from turning relative to a shaft
• Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
• Do not have an external head
• Drive system is a hexagon-shaped hole
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Good for permanent setting of parts, the sharp point of the Cone penetrates deep into the surface to lock in place.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Alloy Steel Set Screw, Hex Socket Drive, Knurled Cup Point, M5-0.8, 16mm Length (Pack of 10)
• Alloy Steel Set Screw, Hex Socket Drive, Flat Point, M5-0.8, 6mm Length (Pack of 10)
• Alloy Steel Set Screw, Hex Socket Drive, Cup Point, M2-0.4, 12mm Length (Pack of 50)
• Alloy Steel Set Screw, Hex Socket Drive, Dog Point, M5-0.8, 12mm Length (Pack of 10)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M3-0.5, 25mm Length (Pack of 100)

Detail Reviews

Black Oxide Alloy Steel Set Screw, Hex Socket Drive, 1/2"-13, 5/8" Length (Pack of 50)

Black Oxide Alloy Steel Set Screw, Hex Socket Drive, 1/2"-13, 5/8" Length (Pack of 50) Reviews

Other Picture

Black Oxide Alloy Steel Set Screw, Hex Socket Drive, 1/2"-13, 5/8" Length (Pack of 50) Feature

• Set Screws keep parts from turning relative to a shaft
• Black Oxide coating helps reduce friction and provides mild corrosion resistance
• Do not have an external head
• Drive system is a hexagon-shaped hole
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

The Black Oxide coating provides some lubricity to the product, meaning that there is less friction generated when using these products. The coating also provides a mild corrosion resistance, but should not be relied on in environments where corrosion resistance is a primary concern.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Alloy Steel Set Screw, Hex Socket Drive, #10-24, 3/4" Length (Pack of 100)
• Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #5-40, 5/8" Length (Pack of 10)
• Alloy Steel Socket Cap Screw, Hex Socket Drive, 5/16"-18, 1" Length (Pack of 100)
• Alloy Steel Set Screw, Hex Socket Drive, Cup Point, Nylon Patch, #8-32, 1/2" Length (Pack of 10)
• Black Oxide Alloy Steel Set Screw, Hex Socket Drive, Flat Point, 1/4"-20, 5/16" Length (Pack of 50)

Detail Reviews

Zinc Plated Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #10-32, 3/4" Length (Pack of 25)

Zinc Plated Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #10-32, 3/4" Length (Pack of 25) Reviews

Other Picture

Zinc Plated Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #10-32, 3/4" Length (Pack of 25) Feature

• Set Screws keep parts from turning relative to a shaft
• Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
• Do not have an external head
• Drive system is a hexagon-shaped hole
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials. Zinc Plating helps to prevent corrosion.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Cup Point is the most common point type, with good holding capability.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

• Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #5-40, 5/8" Length (Pack of 10)
• Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #6-32, 3/8" Length (Pack of 25)
• Black Oxide Alloy Steel Set Screw, Hex Socket Drive, #8-32, 3/8" Length (Pack of 50)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #8-32, 1/2" Length (Pack of 100)
• Black Oxide Alloy Steel Set Screw, Hex Socket Drive, Flat Point, 1/4"-20, 5/16" Length (Pack of 50)

Detail Reviews

6-32 Thd., 3/8 Lg., Brass Tipped Hex Socket Set Screws (1 Each)

6-32 Thd., 3/8 Lg., Brass Tipped Hex Socket Set Screws (1 Each) Reviews

Other Picture

Brass and Nylon Tipped Hex Socket Set Screws - Inch - Steel CAD drawing for this part is available on our website.

Visit Store Now !!

Detail Products

Detail Reviews

Black Oxide Alloy Steel Set Screw, Hex Socket Drive, Dog Point, 1/2"-13, 3/4" Length (Pack of 10)

Black Oxide Alloy Steel Set Screw, Hex Socket Drive, Dog Point, 1/2"-13, 3/4" Length (Pack of 10) Reviews

Other Picture

Black Oxide Alloy Steel Set Screw, Hex Socket Drive, Dog Point, 1/2"-13, 3/4" Length (Pack of 10) Feature

• Set Screws keep parts from turning relative to a shaft
• Black Oxide coating helps reduce friction and provides mild corrosion resistance
• Do not have an external head
• Drive system is a hexagon-shaped hole
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

The Black Oxide coating provides some lubricity to the product, meaning that there is less friction generated when using these products. The coating also provides a mild corrosion resistance, but should not be relied on in environments where corrosion resistance is a primary concern.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Also called extended or pilot point, the flat tip of the Dog Point is extended to fit into a preexisting hole to join two items together.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Alloy Steel Set Screw, Hex Socket Drive, #10-24, 3/4" Length (Pack of 100)
• Alloy Steel Set Screw, Hex Socket Drive, Cup Point, 5/16"-18, 5/8" Length (Pack of 100)
• Alloy Steel Socket Cap Screw, Flat Head, Hex Socket Drive, 1/4"-28, 3/4" Length (Pack of 25)
• Zinc Plated Steel Carriage Bolt, Oval Head, 1/2"-13, 6-1/2" Length (Pack of 5)
• Black Oxide Alloy Steel Set Screw, Hex Socket Drive, Cone Point, 1/4"-20, 1/2" Length (Pack of 50)

Detail Reviews

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, 1/4"-28, 1-1/4" Length (Pack of 100)

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, 1/4"-28, 1-1/4" Length (Pack of 100) Reviews

Other Picture

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, 1/4"-28, 1-1/4" Length (Pack of 100) Feature

• Set Screws keep parts from turning relative to a shaft
• Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
• Do not have an external head
• Drive system is a hexagon-shaped hole
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Cup Point is the most common point type, with good holding capability.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

• Alloy Steel Set Screw, Hex Socket Drive, #5-40, 1/2" Length (Pack of 10)
• Alloy Steel Socket Cap Screw, Hex Socket Drive, 1/4"-28, 2-1/4" Length (Pack of 25)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #6-32, 5/8" Length (Pack of 100)
• Alloy Steel Socket Cap Screw, Flat Head, Hex Socket Drive, 5/16"-24, 1" Length (Pack of 25)
• Alloy Steel Set Screw, Hex Socket Drive, Cup Point, Nylon Patch, 1/4"-20, 1-3/4" Length (Pack of 5)

Detail Reviews